Birmingham Quality Fence: Fence Installation & Repair in Birmingham, AL
Birmingham Quality Fence installs and repairs residential and commercial fencing throughout Birmingham, AL, working with wood, vinyl, chain link, aluminum, and ornamental steel to match your property's security, privacy, and budget needs. Every project starts with a site visit and written estimate itemizing materials and labor, so you know the cost upfront.
We handle the full job: removing old fencing, locating property lines, setting posts to proper depth for local soil conditions, and hanging gates that stay square through Alabama's humidity. Repairs range from replacing damaged pickets to resetting leaning posts after storm damage.
Our service area covers Birmingham and surrounding communities, including Hoover, Vestavia Hills, Mountain Brook, Trussville, and Bessemer. Below, you'll find the fence types we install, what affects pricing, and how our process works from first call to final inspection.
Get a FREE Quote.
Why Choose Birmingham Quality Fence?
Licensed & Insured
Our crews are licensed and insured, with documentation carried on every job site.
Written Estimates
Written quotes separate materials and labor so you know the cost before work begins.
Quality Materials
We work with pressure-treated wood, powder-coated aluminum, vinyl, and galvanized chain link.
Confirmed Scheduling
We confirm a start date before any deposit changes hands.
Full Clean Up Included
Old fence removal, hauling, and site cleanup are included with every install.
Permits & Property Lines
We check setback requirements and HOA guidelines with you before materials are ordered to prevent costly rework.
Fences We Install
Wood Fence Installation
Wood remains the most requested material we install in neighborhoods like Crestwood, Homewood, and Trussville. We build primarily with pressure-treated pine and Western red cedar.
Standard privacy configurations run 6 feet tall with dog-ear or flat-top pickets, though we also install 4-foot picket, board-on-board, and shadowbox styles.
Our posts are set in concrete below the frost line, and we use hot-dipped galvanized or stainless fasteners to resist the corrosion that comes with Alabama's humidity.
What to expect:
- Lifespan: 12–20 years for pressure-treated pine, 20–30 for cedar
- Maintenance: Stain or seal every 2–3 years
- Cost range: Typically the most affordable privacy option
Wood does move with moisture. Some warping and checking is normal, and we discuss board spacing and picket selection with you before installation to minimize it.
Vinyl Fence Installation
Vinyl appeals to homeowners who want privacy without a staining schedule. We install panels in white, tan, khaki, and woodgrain finishes.
Quality matters considerably here. We use virgin vinyl with UV inhibitors and titanium dioxide, which resists the yellowing and brittleness that plague thinner recycled products after a few Alabama summers.
Our installations use aluminum-reinforced bottom rails on privacy panels and steel or aluminum inserts in gate posts to prevent sagging.
Vinyl fencing typically lasts 25–30+ years, requiring only an occasional wash with a hose or mild detergent. Individual panels and pickets are replaceable if damaged, and while upfront cost runs higher than wood, long-term upkeep is lower. Vinyl can crack under sharp impact in cold weather and does not accept paint, so choosing your color at the outset is a permanent decision.
Chain Link Fence Installation
Chain link is our most economical option and the standard choice for pet containment, backyard perimeters, and commercial and industrial sites throughout the Birmingham metro.
We install galvanized chain link in 9, 11, and 11.5 gauge, plus black, green, and brown vinyl-coated mesh for residential properties where appearance matters.
Heights range from 4 feet for residential yards to 8 feet with barbed arms for warehouses, storage yards, and utility sites.
Common additions we install:
- Privacy slats in vertical or diagonal configurations
- Bottom tension wire to deter dogs from pushing underneath
- Top rail for added rigidity
- Single-swing, double-swing, and rolling cantilever gates
Chain link requires almost no maintenance. Galvanized coatings hold up well, and vinyl-coated mesh adds a second barrier against rust.
Aluminum Fence Installation
Aluminum gives you the appearance of ornamental iron without the rust. It is a strong fit for pool enclosures, front yards, and sloped lots.
Because aluminum panels are rackable, they follow grade changes without stair-stepping or leaving gaps at the bottom — useful on the hillside properties common in Vestavia Hills and Mountain Brook.
We install residential, commercial, and industrial grades in flat-top, spear-top, and staggered-picket styles, powder-coated in black, bronze, or white.
For pool applications, we install to BOCA and local code requirements: 4-foot minimum height, self-closing and self-latching gates, and picket spacing under 4 inches.
Lifespan: 30+ years. The aluminum itself will not rust, and the powder coating carries manufacturer warranties in the 20-year range.
Composite Fence Installation
Composite blends wood fiber with recycled polymer, producing boards that look closer to real wood than vinyl does while resisting rot, insects, and splintering.
It is the heaviest material we install, so we set posts deeper and space them tighter to carry the load.
Composite works well for homeowners who want a solid privacy wall with substantial appearance and minimal upkeep — no staining, no sealing, just periodic cleaning.
Considerations:
- Highest upfront material cost of the options listed here
- Lifespan of 25–30 years with manufacturer warranties often covering fade and stain
- Expands and contracts with temperature, so proper gapping at installation is essential
- Limited color palette compared to painted wood
We recommend it most often for shorter runs where appearance is a priority, since cost per linear foot adds up quickly on large perimeters.
Wrought Iron & Ornamental Fence Installation
For estate entrances, historic properties, and courtyards, we install steel ornamental and true wrought iron fencing.
Steel is significantly stronger than aluminum and better suited where security is the primary goal. We can fabricate custom panels, scrollwork, finials, and matching driveway gates.
Because steel rusts when its coating is compromised, we use galvanized steel with powder-coat finishes and recommend inspecting for chips annually. Touch-up paint at the first sign of surface rust prevents larger problems.
Best applications:
- Front-yard and street-facing perimeters
- Driveway and pedestrian entry gates
- Automated gate systems with keypads or intercoms
- Fence repair on existing iron in Birmingham's older neighborhoods
Expect a higher price per linear foot than aluminum, longer lead times on custom work, and a lifespan measured in decades with consistent maintenance.
Birmingham Quality Fence Services
We build, repair, and maintain wood, vinyl, aluminum, and chain link fencing throughout Jefferson and Shelby counties, from single gate adjustments to full property enclosures. Our crews also handle staining, cleaning, storm damage claims, automated gate systems, and removal of old fencing.
Fence Installation
We install privacy, picket, ornamental, and utility fencing sized to your lot lines and local setback rules.
Common builds include:
- Wood privacy — 6' or 8' pressure-treated pine or cedar, dog-ear or board-on-board
- Vinyl — 6' privacy or 4' picket in white, tan, and gray
- Aluminum — 3-rail and 4-rail ornamental, powder-coated black or bronze
- Chain link — 4' to 8' galvanized or black vinyl-coated, with optional privacy slats
Every job starts with a walk of the property, a check for a recorded survey, and an 811 utility locate request before we dig. Posts are set in concrete below the frost line, and gate posts are upsized to carry the swing weight.
We provide written estimates listing materials, post spacing, gate count, and cleanup.
Fence Repair
Most fences fail in sections rather than all at once. We repair what is salvageable and replace only the components that are past their service life.
Typical repairs we perform include resetting or replacing leaning panels, where posts are reset and rails re-plumbed and re-secured. Loose or missing pickets are refastened using ring-shank nails or exterior screws.
Rotted bottom rails are replaced, with a rot board added if grade contact is the cause. Sagging chain link is addressed by re-stretching the fabric and replacing tension bands and the top rail. Rusted aluminum or steel hardware is swapped out for stainless or coated fasteners.
We can match most common picket profiles and vinyl colors. When a discontinued style can't be matched, we tell you upfront and discuss options for the affected run.
Gate Repair & Installation
Gates absorb more wear than any other part of a fence because they move. We correct sagging, dragging, and latching problems, and we build replacement gates when a frame has racked beyond adjustment.
Our gate work covers:
- Welded steel or wood-frame gates sized 3' to 16'
- Post replacement and concrete footings for gate posts
- Anti-sag kits, cross-bracing, and diagonal cable tensioners
- Hinge, latch, drop rod, and self-closing hardware replacement
- Pool gates with self-latching hardware positioned for code compliance
- Pet gates and secondary access gates cut into existing runs
We check gate clearance across the full swing path, since grade changes and settling are often the real reason a gate drags.
Fence Post Repair & Replacement
Posts are the structural element of a fence, and rot at the soil line is the most common failure point in the Birmingham area's clay soils.
We evaluate posts by probing at grade, checking for movement, and looking at the condition of the concrete collar. Sound posts with minor surface checking stay; posts that flex or crumble come out.
Replacement methods we use:
- Full removal — old post and footing extracted, new post set in fresh concrete
- Sistering — a steel or treated post added alongside a sound-but-shifted post
- Post spur repair — galvanized spur bolted to the standing post where excavation is restricted
Gate and corner posts get 6x6 or heavier-gauge steel where load requires it, along with deeper footings than line posts.
Fence Panel Replacement
When a panel is broken, warped, or missing, we replace it without rebuilding the surrounding fence.
We remove the damaged section, inspect the posts and rails behind it, and install a matching panel. For vinyl and aluminum, we identify the manufacturer and profile so the new section aligns with existing rails and post routing.
Wood panels are built on site or supplied pre-assembled, depending on the run. We can adjust picket spacing and rail height to match a fence installed years ago.
If more than a few panels are failing on the same run, we'll show you the cost comparison between piecemeal replacement and rebuilding the section outright.
Fence Staining & Sealing
Untreated wood fencing in central Alabama weathers gray within a year and holds moisture through humid summers. Stain and sealer slow that process.
Our process:
- Clean and rinse to remove mildew, pollen, and surface dirt
- Allow the wood to dry to an appropriate moisture level
- Mask hardware, plants, and adjacent siding
- Apply oil-based or semi-transparent stain by sprayer, then back-brush
- Coat both faces of the fence and the tops of pickets
New pressure-treated pine typically needs several months to dry before it will accept stain. We advise on timing rather than coating wood too early.
Recoating intervals generally run three to five years, depending on sun exposure and product.
Fence Power Washing & Cleaning
We clean wood, vinyl, and aluminum fencing to remove mildew, algae, red clay staining, and pollen buildup.
Pressure and nozzle selection matter on wood. We use lower pressure with a wide fan tip and a cleaning solution to lift growth without furring the grain or gouging soft
pine.
Vinyl and aluminum tolerate a straightforward wash, though we treat mildew on shaded north-facing runs with a dedicated cleaner rather than pressure alone.
Cleaning is also the required first step before staining. If you plan to seal the fence, we schedule the wash and the stain application together so drying time is accounted for.
Automatic Gate Installation
We install and service gate automation on swing and slide gates for residential drives and commercial sites.
Components we work with:
- Operators — swing arm, underground, and slide rail units
- Access controls — keypads, card readers, transmitters, and smartphone-based controllers
- Safety devices — photo eyes, safety edges, and reversing sensors
- Entry detection — vehicle loops, free-exit probes, and telephone entry systems
- Power — 120V hardwired or solar with battery backup
We size the operator to the gate's weight and length, run low-voltage wiring in conduit, and set safety devices to reverse on obstruction. Existing gates can often be automated if the frame is square and the posts and hinges will carry the added cycling load.
Driveway Gate Installation
Driveway gates need a frame stiff enough to resist sag across a long span. We build single-swing, double-swing, cantilever slide, and rolling gates in wood-clad steel, aluminum, or ornamental steel.
Before fabrication we measure the opening, check the driveway slope, and confirm turning radius and vehicle stacking space. Slope often decides between swing and slide, since a rising grade limits how far a swing gate can travel.
Openings wider than about 12 feet usually get a double gate or a slide configuration to control leaf weight. Posts are set in deep footings sized to the gate's load, and we can pre-wire for automation even if you add the operator later.
Storm & Weather Damage Fence Repair
High wind, fallen limbs, and saturated soil account for most sudden fence failures here.
We respond with:
- Temporary bracing or fencing to secure pets and pools
- Documentation with photos and an itemized scope for insurance claims
- Debris and limb removal from the fence line
- Post resetting where soil movement caused leaning
- Section rebuilds matched to the undamaged runs
We provide written estimates formatted for adjusters, including line items for materials, labor, and disposal.
Where a fence has failed repeatedly at the same spot, we look at drainage and root intrusion rather than just replacing the same components again.
Custom Fence Design
We build fencing to fit specific site conditions and design preferences rather than standard panel dimensions alone.
Custom work includes:
- Horizontal board fencing with varied picket widths and reveals
- Stepped and racked runs for sloped or terraced yards
- Mixed materials — wood infill with steel frames, or aluminum panels between masonry columns
- Lattice, louvered, and shadowbox tops
- Screening around HVAC units, dumpsters, trash enclosures, and pool equipment
- Integrated planters, benches, and gate arbors
- Post caps, lighting, and decorative hardware
We provide layout drawings with post locations, panel dimensions, and gate placement before fabrication so you can confirm the plan.
Fence Removal & Demolition
We remove old fencing on properties where a replacement is going in and on lots where the fence is simply coming out.
Our removal includes cutting fabric or panels into manageable sections, extracting posts and concrete footings, and backfilling and tamping the resulting holes.
Concrete footings are hauled off with the rest of the debris rather than buried on site. We load material for disposal and sweep or rake the fence line afterward.
For chain link, we can salvage reusable fabric and posts if you want to keep them. We also handle partial removals, such as taking out a single run to open access for construction equipment.
Commercial & Specialty Fencing
Commercial Fence Installation
We install galvanized and vinyl-coated chain link, ornamental steel and aluminum, and heavy-gauge wood screening for retail centers, apartment complexes, self-storage facilities, and office parks, using SS40 or SS20 pipe framework, concrete-set line posts, and commercial-grade fittings.
We coordinate with general contractors and property managers on gate placement, dumpster enclosures, and vehicle access, including cantilever slide gates, panic-hardware swing gates, and card reader or keypad entry. Site plans, bid documents, and spec sheets welcome — we quote directly from them.
Security & Industrial Fencing
We build 8-foot and 10-foot chain link with three-strand barbed wire outriggers, welded wire mesh panels resistant to cutting, and anti-climb ornamental steel with narrow picket spacing.
Common upgrades: barbed wire or razor ribbon arms, bottom rail or tension wire to prevent lifting, privacy slats for equipment yards, crash-rated gates for truck entrances, and concertina coil on utility and substation perimeters. Manufacturing plants, scrap yards, fuel depots, and utility substations often carry insurance or regulatory requirements on fence height and gauge, which we confirm in writing before fabrication.
Construction Site & Temporary Fencing
We supply panel fencing and driven-post temporary chain link for construction, demolition, and event sites across the Birmingham metro. Standard panels run 6 feet tall in 10-foot or 12-foot sections, connected with clamps and stabilized by weighted bases or ground stakes.
Rental terms run weekly, monthly, or project-length. We handle delivery, setup, relocation, and teardown/haul-off. Windscreen and mesh banners available for dust control, OSHA visibility, or contractor branding.
Farm, Ranch & Agricultural Fencing
We install woven field fence, barbed wire, high-tensile smooth wire, and welded wire for landowners around Birmingham. Woven field fence (47"–49", barbed top strand) suits cattle, goats, and sheep. Barbed wire (4–5 strands, wood or T-posts) suits cattle and boundary lines. High-tensile electric (3–7 strands, energizer) supports rotational grazing. Welded wire/no-climb (2"×4" mesh, 60") suits horses and poultry.
H-brace corner and brace assemblies hold tension across long runs and uneven terrain, with wood, pipe, and T-post options. Livestock gates, cattle guards, and pasture cross-fencing included.
Athletic Field & Sports Fencing
We install backstops, outfield fencing, foul poles, and court enclosures for parks departments, schools, and private facilities. Baseball backstops run 20–30 feet with overhang sections; outfield fencing sits at 4–6 feet with protective top caps. Tennis and pickleball courts typically use 10-foot vinyl-coated chain link with 1¾-inch mesh.
We also add windscreen, safety padding on rails and posts, and double-swing maintenance gates wide enough for mowers and field equipment.
HOA & Pool Safety Fence Compliance
Alabama pool barriers follow the International Residential Code: enclosures at least 48 inches tall, no gaps allowing a 4-inch sphere to pass, and self-closing, self-latching gates with latches at least 54 inches above grade. We build aluminum, vinyl, and wood pool enclosures to spec and verify latch heights and gate swing at installation.
For HOA neighborhoods, we work from architectural guidelines on approved materials, heights, colors, and setbacks. Send your covenant documents and we'll match the spec so your fence passes ARC review and local inspection.
The Birmingham Quality Fence Process
Every fence we build follows the same four steps, from the first phone call to the final walkthrough.
01
Free Estimate
We walk the property, measure the fence line, and provide a written quote itemizing materials, labor, and gate count.
02
Design & Layout
We confirm property lines, check setback and HOA requirements, and finalize material, height, and gate placement.
03
Installation
Old fencing is removed if needed, posts are set below the frost line in concrete, and panels and gates are installed and squared.
04
Final Walkthrough
We inspect gate swing, hardware, and cleanup with you before closing out the job.
Hear What Our Clients Have To Say
Proudly Serving Other Areas
Hoover
Bessemer
Helena
Leeds
Vestavia
Alabaster
Calera
Moody
Homewood
Pelham
Gardendale
Clay
Mountain Brook
Chelsea
Trussville
280
Birmingham Quality Fence FAQs
We install wood privacy fences (typically pressure-treated pine or cedar), vinyl, aluminum, chain link, and ornamental steel. Wood remains the most requested option for residential backyards in Birmingham, while aluminum is common around pools because it meets barrier code requirements.
Chain link works well for large properties, dog runs, and commercial lots where visibility and budget matter more than privacy. We also build custom gates, including single-swing, double-drive, and automated entry gates with keypad or remote operation.
For farm and acreage properties outside the city, we install field fence, welded wire, and split rail.
Yes. Storm damage, leaning posts, rotted pickets, sagging gates, and rusted chain link are the repairs we see most often in this area.
Alabama's clay soil and heavy summer storms are hard on wood posts. If the post is rotted at ground level but the rest of the fence is solid, we can replace individual posts and reset them in concrete rather than rebuilding the whole run.
We also repair fences we didn't install. After an inspection, we'll tell you honestly whether a repair makes financial sense or whether replacement is the better value.
In most cases within Birmingham city limits, a residential fence under six feet in a rear or side yard does not require a building permit. That said, requirements vary by jurisdiction — Hoover, Vestavia Hills, Mountain Brook, Trussville, and Homewood each have their own zoning ordinances.
Pool fences are a separate matter. Alabama follows barrier requirements that generally call for a minimum four-foot enclosure with self-closing, self-latching gates.
If your property is in an HOA, you'll likely need architectural committee approval regardless of city rules. We recommend confirming with your HOA before your installation date, and we're glad to provide the material specs and drawings they ask for.
Alabama has no statewide fence height law — limits are set locally. In Birmingham, residential privacy fences in rear and side yards are commonly permitted up to eight feet, while front yard fences are usually restricted to four feet or less.
Corner lots often have additional sight-triangle rules that limit height near intersections so drivers can see cross traffic.
Six feet is the standard we install most often for backyard privacy. Eight-foot fences require heavier posts and closer post spacing to handle wind load, which affects the price.
Start with these checks:
- Licensing and insurance. Ask for a certificate of general liability insurance and workers' compensation coverage, and verify the contractor holds any required local business license.
- Written, itemized estimates. The quote should list post depth, concrete usage, material grade, gate hardware, and cleanup — not just a lump sum.
- Local references. Ask for addresses of jobs completed in the past year within a few miles of your home so you can see how the work has held up.
- Warranty terms in writing. Labor warranties and manufacturer material warranties are separate; know what each covers.
- Utility locates. A reputable contractor calls Alabama 811 before digging. This service is free and required by law.
Pricing in the Birmingham area depends on linear footage, height, material, terrain, and the number of gates. As general ranges for residential installation:
Fence type
Typical cost per linear foot
Chain link (4 ft)
$15 – $25
Wood privacy (6 ft)
$25 – $45
Vinyl privacy (6 ft)
$35 – $60
Aluminum ornamental
$35 – $65
Several factors push costs higher: sloped or rocky ground, removal and disposal of an existing fence, limited equipment access, and custom or oversized gates.
Because every yard is different, the only accurate number comes from measuring the property. We provide free on-site estimates with itemized pricing so you can see exactly what you're paying for.